Forums › DADman › DADman Control Software › problems with monterey/DADman interface?

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 1 July 2022 at 12:29 PM #1935
    gti98@hotmail.comgti98@hotmail.com
    Participant

      When opening DAD software on power up macmini (intel) monterey 12.4 DADman meters do not work. When trying to quit DADman you always have to force quit. When opening again everything works correctly. Is it due to updates with monterey?

      1 July 2022 at 3:37 PM #1939
      NTP/DAD SupportNTP/DAD Support
      Keymaster

        That is hard to tell when you don’t mention which version of DADman you use.

        You must at least use DADman v. 5.6 as that is the first version that supports Monterey.

         

        3 July 2022 at 1:23 AM #1945
        gti98@hotmail.comgti98@hotmail.com
        Participant

          Thanks. I´m using 5.6 beta version of DADman and the same problem persist

          4 July 2022 at 4:51 PM #1950
          NTP/DAD SupportNTP/DAD Support
          Keymaster

            I recommend you contact technical support for further help.

            If you use DADman with an MTRX or MTRX Studio then please contact Avid tech support.

            If you use DADman with a DAD product, then please send an e-mail to support@ntp.dk with a screenshot of Device List from DADman. Make sure you have selected (check-marked) the unit in the Device list so all cards, firmware versions, etc. are shown.

             

          • Author
            Posts
          Viewing 4 posts - 1 through 4 (of 4 total)
          • You must be logged in to reply to this topic.