[Lapo]

I have a few additions to the initial request.

 

1.  The ability to have more than 3 sources and inputs on the MOM configuration.  A lot of us are using StreamDecks as a monitor controller and desire to sometimes have more sources and outputs.

2. An Official Stream Deck plugin for DAD.

3. Allow the naming of the Thunderbolt inputs and outputs in DADMAN and have those names show up in the Thunderbolt driver of the DAW.

4.  Allow multiple outputs to be selected simultaneously on the monitoring section

5.  Allow the MOM unit to be operated without the need of a hosted app (DADMAN) on the computer

6. Allow re-ordering of sources in the monitor section in DADMAN

[Lapo]

1.  You can create this configuration using the Monitor Profile and Fold Down options.  DADMAN allows you to route signal anywhere.  I would check with AVID first to see if Pro Tools supports this routing config.

2.  Yes, SPQ is on both HP outputs.

[Lapo]

What was the fix for this?  My recommendation would have been to try another computer with TB3

[Lapo]

The latest drivers are compatible with Windows 11 Core ASIO.

Download Thunder | Core Audio Drivers

[Lapo]

You can most certainly listen to DAW output and mic/line at the same time.  You have to create a monitoring profile to support this configuration.  I do it all the time when I want low latency tracking for vocals.

[Lapo]

Hi Alban,

You have to use Ethernet with AXCENTER because that is the only way to connect the AXCENTER to the DANTE network with your other DANTE devices.  The Thunderbolt port is only necessary when you are routing audio via thunderbolt.  You do not need the thunderbolt to control DADMAN.  I hope that answers your question.

 

 

[Author]

Posts